Low slope, no standing water

Flat Roof and TPO Repair in Texas City, TX

Flat roofs do not shed water the way steep roofs do. When a Gulf downpour hits, water pools on the surface and hunts for weak seams, punctures, and clogged drains. We find the real source of your flat roof leak and repair it right.

↗
Fast online booking

Request service today

Tell us what is happening and a local dispatcher will confirm the next step.

Call Now +1 (409) 683-9218 → No spam. No obligation. Just practical help.
Roofer heat-welding a patch on a white TPO flat roof in Texas City, TX
Careful work. Honest options.
About this service

Flat and Low-Slope Roof Repairs That Hold

A flat roof is only as good as its seams and its drainage. TPO is a tough white membrane, but heat, ponding water, and foot traffic wear it down over time. In Texas City, one Gulf downpour can leave standing water on a low spot for a full day, and that water works into every weak seam and puncture it can find.

We do not just patch the stain on your ceiling. We walk the whole surface, check every welded seam, look for punctures from debris and foot traffic, and test how the roof drains. Then we explain what we found in plain terms and lay out the fix. We service flat roofs across Downtown Texas City, La Marque, and Dickinson, on homes with flat additions, garages, and small commercial buildings.

  • ✓ TPO seam and patch repairs
  • ✓ Ponding water fixes
  • ✓ Drainage and scupper checks
  • ✓ Homes and small businesses
Customer reviews

What Homeowners Say About Our Flat Roof and TPO Repair

Real reviews from flat roof owners with dry ceilings again.

★★★★★

Our flat roof ponding solved

Water used to pond on our flat roof in Clairmont and eventually found its way inside. They repaired the low spots and the TPO seams, and now water drains off properly. No more ceiling bubbles after rain, which is a huge relief.

Mildred S.Clairmont, TX
★★★★★

Our TPO repair done properly

The TPO on our Grand Cay Harbour flat roof had split seams that leaked into our sunroom. They repaired the seams cleanly and reinforced the weak areas. It looks like a professional job should, and the sunroom has stayed dry.

Earl R.Grand Cay Harbour, TX
★★★★★

They found every weak seam

Our flat roof in Chelsea Manor leaked in three different places. They inspected the whole TPO surface, found every weak seam, and repaired them all. Thorough, honest, and the roof has been dry through the wettest months.

Hattie Q.Chelsea Manor, TX
★★★★★

Real flat roof specialists here

Flat roofs are tricky and our Heron's Landing home proved it with constant small leaks. They knew exactly how to repair the TPO and where water was getting trapped. The crew was neat, the communication was clear, and the leaks are gone.

Chester P.Heron's Landing, TX
★★★★★

Dry through the rainy season

Our Cobblestone flat roof leaked every rainy season without fail. After their TPO repair, we just made it through the wettest stretch in years with a completely dry ceiling. I tell my neighbors about them every chance I get.

Bertha O.Cobblestone, TX
★★★★☆

Good TPO work, wanted faster finish

The TPO seam repairs on our Sunrise Cove flat roof are holding up well and the leaks have stopped. The job stretched a day longer than I expected, which was a minor annoyance. Quality of the actual repair work was very good.

Herman N.Sunrise Cove, TX
What's included

What We Check on Your Flat Roof

We inspect the membrane, the seams, and the drainage together, because a flat roof leak is often a drainage problem first.

✓

Membrane condition

We walk the surface and look for punctures, cuts, blisters, and worn spots from foot traffic, tools, or storm debris.

✓

Seam integrity

Every welded seam is checked for splits, lifted edges, and shrinkage. Heat and age can pull seams apart and open gaps.

✓

Drainage and scuppers

We check drains, scuppers, and low spots to see where water sits after rain and why it is not moving off the roof.

✓

Flashing and edges

Edges, parapets, and any place the roof meets a wall, curb, or rooftop unit get a close look for gaps and failed seals.

How it works

A Clear Roof Leak Repair Process

01

Initial assessment

We listen to what you are seeing, where the water shows up, and when the problem started.

02

Roof inspection

We walk the flat roof surface, checking the membrane, seams, flashing, and drainage from edge to edge.

03

Options explained

You get a plain-English rundown of what we found and the practical ways to fix it, with no pressure.

04

Work completed

Approved work is done with materials suited to your roof type and our Gulf Coast weather.

05

Final checks

We review the repair, confirm the roof drains properly, clean up, and tell you what to watch for down the road.

Tools & methods

Tools and Checks We Use

Good checks find the entry point before water finds another way in.

Membrane walk-through

We walk the whole surface to find punctures, blisters, and worn areas that are easy to miss from the edge of the roof.

Seam inspection

Welded seams are checked line by line for splits and lifted edges that let water slip under the membrane.

Drainage testing

We watch how water moves across the roof to confirm drains and scuppers carry it off instead of letting it sit and pond.

Patch and weld checks

Patched areas are cleaned, bonded, and checked edge to edge so the repair holds through Gulf Coast heat and rain.

Real results

Common Flat Roof Situations We Address

Ponding water after downpours

Before

After a Gulf downpour, water sits in a low spot for a day or more. Standing water works into the seams and softens the membrane, and the stain inside keeps growing with every storm.

After

We find why the spot is low, fix the drainage issue, and repair the stressed seams, so water leaves the roof the way it should.

Split and lifting seams

Before

Heat and age shrink the membrane, and welded seams pull apart or lift at the edges. Even a small split gives rain a direct path under the membrane.

After

We clean, dry, and re-weld or patch the seam, then check the surrounding seams for the same wear before it becomes another leak.

Punctures from debris and traffic

Before

Branches, dropped tools, and foot traffic can poke or cut the membrane. The hole may be tiny, but on a flat roof the water has nowhere to run, so it finds the cut.

After

We locate punctures with a close walk-through and patch them with heat-welded material that bonds to the existing membrane.

Problems we solve

Flat Roof Leak Signs Worth Checking

Flat roofs give fewer warnings than steep roofs, so small signs matter more. If you notice any of these, it is worth a look.

Ask a pro →
01

Standing water that lingers

Water still sitting a day or more after rain means the roof is not draining right, and the seams under it are taking the hit.

↗
02

Bubbles or blisters

Raised spots in the membrane can mean trapped water or air under the surface, which weakens the layer over time.

↗
03

Stains under the roof

Ceiling stains or damp insulation below a flat roof often trace back to a failed seam or a hidden puncture.

↗
Proof you can check

Our Commitment to Quality and Trust

✓
Licensed & InsuredServing Texas City homes
✓
Storm Damage ExperienceGulf Coast roofing know-how
✓
Local Response TeamBased in Texas City, TX
Good questions

Frequently Asked Questions

+1 (409) 683-9218 →

TPO is a single-ply white membrane used on low-slope and flat roofs. You see it on homes with flat additions, garages, and small commercial buildings. The sheets are welded together at the seams to make one waterproof layer, and the white surface reflects heat, which helps in the Texas sun.

Flat roofs are built with a slight slope to drain water. Over time, the roof can settle, insulation can compress, or drains and scuppers can clog with leaves and debris. After a Gulf downpour, even a small low spot can hold water for a day or more, and standing water wears down seams and the membrane.

Yes. Split seams and small punctures are often repaired with a heat-welded patch or a fresh seam weld. The area is cleaned, dried, and tested so the patch bonds well. If the membrane around the damage is still in good shape, a patch can last a long time.

We inspect the membrane, seams, flashing, and drainage. Water on a flat roof can travel between layers or along the deck before it shows inside, so we trace it back from the interior stain. We also check for punctures from debris or foot traffic and low spots where water ponds.

Most patch and seam repairs are done in one visit, usually a few hours. Larger repairs that need drainage fixes or multiple patches can take longer. We explain the scope before we start so you know what to expect.

Ready when you are

Need Flat Roof Repair Help?

Contact Texas City Roof Leak Repair to talk through your flat roof problem and set up flat roof and TPO repair in Texas City, TX. We will start with what you are seeing and help you decide the right next step.

Book Now +1 (409) 683-9218 →
Request an appointment

Contact Us for Roof Leak Repair

Tell us what you are seeing, where the leak shows up, and what kind of roof you have. We will confirm the next step and set up a time that works for you.

Tap to call+1 (409) 683-9218